Brief description of metal mold powder coating
With organic powder coating and aluminum, silver, copper, gold and other metal pigments evenly mixed, can provide a suitable room, indoor and outdoor use of paint in a variety of environments.
A variety of beautiful metal effect: strong flash, flash, micro chrome, bright silver, floating, flash gold etc.. The utility model has the advantages of simple industrial application, stable continuous coating effect and good color consistency. Anti - scratch, anti - Fingerprint effect is good, can have high surface hardness, chemical proof agent performance is strong. Long term outdoor durability and resistance to baking discoloration. (Note: transparent powder coating is recommended as a cover layer under high performance requirements
1, store shelves; 2, furniture, metal, feet, pears; 3, sports facilities, fitness equipment; 4, household appliances; 5, industrial equipment, hardware; 6, lamps, toys; 7, other trial appearance effects.
Products available for curing systems, G series high light (greater than 80%), B series semi light (80 - 20%), W series light (less than 20%) products. The specific luster color is specified by the user, and can be made into a variety of fine art texture products.
1.4-1.8g/cm3 (vary according to recipe and color)
Grain size distribution
Less than 100 microns, can be adjusted according to construction requirements
200 degrees (workpiece temperature) 10 minutes
All tests were made of O.8mm thick rust removing cold rolled steel plate with a film thickness of 60-80 microns.
Adhesion (panel method)
Less than 3mm
More than 50kg.cm
More than 7mm
Salt spray test
The aging test of QUV313 (24h, 8h/60 C light, "C 4h/50 B/T 14522-1993 condensation)
Light rate greater than 80%
The properties of the above coating may decrease slightly with the decrease of gloss and texture.
Packed in cartons lined with two layers of PVC bags, packed in cartons of net weight 25kg per carton, lined with PVC bags, net weight 25kg or 20kg per carton.
Metal type powder coating should be stored at 35% degrees below, dry, ventilated, clean room, shall not be near the fire source, heating, while avoiding direct sunlight, is strictly prohibited open-air stacking. Under this condition, the powder can be stored for 12 months, extended and renewed for verification. If the result meets the requirements, it can still be used. (Note: for fast curing and gloss less than 40% powder, storage temperature is lower than 30 degrees is appropriate; all types of powder because of its low storage temperature and storage period extended
Health and safety
The powder coating does not contain toxic substances, baking power and no toxic gases produced by environmentally friendly products, but should avoid inhaling dust during use, the operator should wear anti-dust masks, glasses, and minimize the long-term contact with the skin and powder coating, coating adhesion to the skin, can be washed with soap.